Speak directly with a DUNDI director about distribution, OEM, private-label, or long-term cooperation.
10°-20° 15°-30° Fixed-CCT LED Zoom Profile Spotlight
The DUNDI 10°–20° / 15°–30° fixed-CCT LED zoom profile spotlight combines manual zoom, fixed 3200 K or 5600 K white light and fan cooling for theatre and studio lighting.
- Eight DD-PF1020 / DD-PF1530 models: 300 W / 200 W versions
- 320 W / 230 W maximum power consumption
- CRI ≥96 · TLCI ≥96
- DMX512 / RDM · 2 / 3-channel modes
- 16-bit or higher dimming · PWM ≥28 kHz
- Optional iris and gobo holder
10°–20° / 15°–30° Fixed-CCT LED Zoom Profile Spotlight
The DUNDI 10°–20° / 15°–30° fixed-CCT LED zoom profile spotlight provides narrow-beam coverage, manual zoom and fixed 3200 K or 5600 K white light for theatres, broadcast studios and indoor stages. Choose a 300 W or 200 W version, with maximum power consumption of 320 W or 230 W respectively.
This page covers eight fan-cooled DD-PF1020 and DD-PF1530 models. Both ranges use the longer standard housing shown below. The 10°–20° and 15°–30° ranges are separate models; select the required range when ordering.
Fixed-CCT Zoom Profile Series — 18-Model Comparison
| Model | Zoom Range | CCT | Maximum Power Consumption | LED Source | Cooling |
|---|---|---|---|---|---|
| DD-PF1020A56 | 10°–20° | 5600 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF1020A32 | 10°–20° | 3200 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF1020B56 | 10°–20° | 5600 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF1020B32 | 10°–20° | 3200 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF1530A56 | 15°–30° | 5600 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF1530A32 | 15°–30° | 3200 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF1530B56 | 15°–30° | 5600 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF1530B32 | 15°–30° | 3200 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF2550A56 | 25°–50° | 5600 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF2550A32 | 25°–50° | 3200 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| DD-PF2550B56 | 25°–50° | 5600 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF2550B32 | 25°–50° | 3200 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| DD-PF1020N56 | 10°–20° | 5600 K | 230 W | 88 × 3 W LEDs | Fanless |
| DD-PF1020N32 | 10°–20° | 3200 K | 230 W | 88 × 3 W LEDs | Fanless |
| DD-PF1530N56 | 15°–30° | 5600 K | 230 W | 88 × 3 W LEDs | Fanless |
| DD-PF1530N32 | 15°–30° | 3200 K | 230 W | 88 × 3 W LEDs | Fanless |
| DD-PF2550N56 | 25°–50° | 5600 K | 230 W | 88 × 3 W LEDs | Fanless |
| DD-PF2550N32 | 25°–50° | 3200 K | 230 W | 88 × 3 W LEDs | Fanless |
Model code: DD = DUNDI; PF = Profile Fix (fixed-CCT profile spotlight); 1020 / 1530 / 2550 = zoom range; A = 300 W version; B = 200 W version; 56 = 5600 K; 32 = 3200 K; N = fanless. All fanless models are 200 W versions.
LED wattages are nominal ratings per LED, not actual fixture consumption. The series table includes other versions for comparison; this page represents the eight fan-cooled DD-PF1020 and DD-PF1530 models.
Key Features
- 10°–20° or 15°–30° manual zoom in the longer standard housing.
- Separate fixed 3200 K and 5600 K models.
- CRI ≥96; TLCI ≥96; TM-30 Rf ≥91, Rg 99.
- Seven-element optical system.
- 16-bit or higher dimming; PWM ≥28 kHz; six dimming modes.
- DMX512 / RDM with 2-channel and 3-channel modes.
- Intelligent variable-speed fan cooling.
- Optional iris and gobo holder available on request.
Fixed-CCT LED Zoom Profile Spotlight Specifications
| Parameter | Specification |
|---|---|
| Models | DD-PF1020A56 / DD-PF1020A32 / DD-PF1020B56 / DD-PF1020B32 / DD-PF1530A56 / DD-PF1530A32 / DD-PF1530B56 / DD-PF1530B32 |
| Zoom | 10°–20° or 15°–30°, manual; select the range when ordering |
| CCT | 5600 K (56 models) or 3200 K (32 models); fixed per fixture |
| LED Source | A: 88 × 5 W LEDs; B: 88 × 3 W LEDs |
| Maximum Power Consumption | A: 320 W; B: 230 W |
| Input Voltage | AC 100–240 V, 50/60 Hz |
| Colour Rendering | CRI ≥96; TLCI ≥96; TM-30 Rf ≥91, Rg 99 |
| Control | DMX512 with RDM; local buttons and rotary encoder for dimming |
| DMX Modes | 2-channel / 3-channel |
| Dimming | 16-bit or higher; six selectable modes; PWM ≥28 kHz |
| Display | OLED, Chinese / English menus; 30 × 15 mm |
| Cooling | Variable-speed fan; stops below 20% output, as specified in the datasheet |
| Maximum Fan Noise at 1 m | 300 W version: ≤39 dBA; 200 W version: ≤29 dBA |
| LED Lifetime | 50,000–100,000 hours |
| Housing | Aluminum alloy; anodized or powder-coated finish |
| IP Rating | IP20, indoor use |
| Operating Ambient Temperature | −25 °C to +40 °C |
| Standard Accessories | Optical diffusion plate, power input/output connectors and signal input/output connectors |
| Optional Accessories | Iris and gobo holder |
Luminous Flux by Power and CCT Version
| Parameter | Specification |
|---|---|
| 300 W / 3200 K | 10,800 lm |
| 300 W / 5600 K | 12,700 lm |
| 200 W / 3200 K | 8,900 lm |
| 200 W / 5600 K | 10,200 lm |
Selecting a Fixed-CCT LED Zoom Profile Spotlight
Start with throw distance and target size. At the same distance, 10°–20° provides a narrower beam for smaller targets; 15°–30° offers wider coverage. Manual zoom is adjusted at the fixture, not through DMX. Choose 3200 K for tungsten-white or 5600 K for daylight-white light. Each fixture has one fixed CCT.
Use maximum consumption of 320 W for A models and 230 W for B models when planning electrical capacity. LED wattages are nominal ratings per diode. Specify optional iris or gobo-holder requirements with your enquiry.
For wider coverage, compare the 25°–50° LED zoom profile spotlight. Confirm the required beam diameter and illuminance before choosing the optical range.
Photometric Reference at 10 m
| Version | 10° / 20° Centre Illuminance | 15° / 30° Centre Illuminance |
|---|---|---|
| 300 W / 3200 K | 1,861 / 612 lx | 1,253 / 387 lx |
| 300 W / 5600 K | 2,265 / 774 lx | 1,502 / 461 lx |
| 200 W / 3200 K | 1,611 / 502 lx | 1,003 / 293 lx |
| 200 W / 5600 K | 1,837 / 610 lx | 1,218 / 369 lx |
| Beam Diameter at 10 m | 1.75 / 3.53 m | 2.63 / 5.36 m |
Published datasheet values are shown at 10 m. Open DATASHEET for additional throw distances and model-specific photometric tables.
15°–30° Profile Spotlight Demonstration
Watch the DUNDI 200 W 15°–30° profile demonstration as an operation reference. Use the selected model’s specifications for its power, CCT and beam range.
10°–20° / 15°–30° Fan-Cooled Dimensions
| Parameter | 10°–20° | 15°–30° |
|---|---|---|
| Published Size (Datasheet) | 87 × 29 × 29 cm | 87 × 29 × 29 cm |
| Packing Size | 94 × 31.5 × 33 cm | 94 × 31.5 × 33 cm |
| Net Weight | 14.8 kg | 15.1 kg |
| Gross Weight | 16.8 kg | 17.1 kg |
The drawing labels L 830 mm; the datasheet size table lists 87 × 29 × 29 cm. Confirm installation clearance with DUNDI before finalizing the mounting layout. Fanless models have separate dimensions and weights.
Fixed-CCT LED Zoom Profile Spotlight FAQ
Is this a fixed-angle or zoom fixture?
It is a manually adjustable 10°–20° or 15°–30° zoom fixture, depending on the model ordered. Fixed-CCT describes the single colour temperature, not a fixed beam angle. Each fixture supplies either 3200 K or 5600 K.
Which models use this main image?
The eight fan-cooled DD-PF1020 and DD-PF1530 A / B models share the longer exterior shown here. The 25°–50° and fanless versions have different housings.
What is the difference between the DMX modes?
The 2-channel mode provides master dimming and strobe. The 3-channel mode adds a 16-bit dimmer fine channel. Neither includes motorized zoom. Open USER MANUAL for the channel map.
Is a fanless version available?
Yes. The series includes six 200 W fanless models, including DD-PF1020N56 / N32 and DD-PF1530N56 / N32. They have a different housing. The 300 W versions use fan cooling.
Where are the fixed-CCT LED zoom profile spotlight documents?
DATASHEET contains the 18-model series, dimensions and photometric tables. USER MANUAL covers operation, DMX and master/slave instructions. Both can be viewed on the page or opened as PDFs.
Request a Narrow-Beam Profile Spotlight Quotation
Send the required CCT, power version, quantity, destination and throw distance. Our team can discuss the fixed-CCT LED zoom profile spotlight and arrange a live demonstration. Include acoustic constraints and optional-accessory requirements with your enquiry.
Compare the fixed-CCT Fresnel family for Fresnel optics, or explore DUNDI lighting technology. For control protocols, see the ESTA published lighting-control standards.
|
