




Full-Color LED Broadcast & Studio Fresnel Spotlight DD-SC200
The DUNDI DD-SC200 full-color LED Fresnel spotlight combines 2700–10,000 K adjustable CCT, green–magenta adjustment and 16°–60° motorized zoom for broadcast, theatre and studio lighting.
- 360° hue · saturation · 72 preset colours
- Average CRI ≥95 · average TLCI ≥95
- DMX512 / RDM · 6 / 14 / 15-channel modes
- 16-bit or higher dimming · PWM ≥28 kHz
- Standard fan-cooled model: DD-SC200
DD-SC200 Full-Color LED Fresnel Spotlight
The DUNDI DD-SC200 full-color LED Fresnel spotlight combines adjustable white light, colour mixing and 16°–60° motorized zoom for broadcast studios, theatres and production spaces. Adjust CCT from 2700 K to 10,000 K, refine green–magenta balance through DUV control, or select hue, saturation and preset colours to suit the scene.
The DD-SC200 is the standard fan-cooled full-color model. This page covers DD-SC200; the shared datasheet and user manual also include DD-SC200N, the separate fanless version. The seven models below share exterior imagery, but their light engines, controls and performance differ. Rear labels and control buttons are model-specific.

LED Fresnel Spotlight Series — Model Comparison
| Type | Model | CCT | Maximum Power Consumption | LED Source | Cooling |
|---|---|---|---|---|---|
| Fixed CCT | DD-S56A | 5600 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| Fixed CCT | DD-S32A | 3200 K | 320 W | 88 × 5 W LEDs | Fan-Cooled |
| Fixed CCT | DD-S56B | 5600 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| Fixed CCT | DD-S32B | 3200 K | 230 W | 88 × 3 W LEDs | Fan-Cooled |
| Fixed CCT | DD-S56BN | 5600 K | 230 W | 88 × 3 W LEDs | Fanless |
| Fixed CCT | DD-S32BN | 3200 K | 230 W | 88 × 3 W LEDs | Fanless |
| Tunable White | DD-SW300 | 2700–6500 K | 320 W | 88 × 8 W LEDs | Fan-Cooled |
| Tunable White | DD-SW200 | 2700–6500 K | 230 W | 88 × 5 W LEDs | Fan-Cooled |
| Tunable White | DD-SW200N | 2700–6500 K | 230 W | 88 × 5 W LEDs | Fanless |
| Full-Color | DD-SC200 | 2700–10,000 K | 220 W | 24 × 24 W 5050 LEDs | Fan-Cooled |
| Full-Color | DD-SC200N | 2700–10,000 K | 220 W | 24 × 24 W 5050 LEDs | Fanless |
LED wattages indicate nominal ratings per LED, not actual fixture power consumption.
This series includes 11 models: two full-color, three tunable-white and six fixed-CCT versions. Fan-cooled and fanless versions have different housings and dimensions. Exterior images may be shared within the same cooling version; rear labels and controls vary by model. Refer to the relevant model datasheet for LED source, power consumption and detailed specifications.
Technical specifications below apply to DD-SC200. Compare the fixed-CCT Fresnel product family for fixed-CCT options.
Key Features
- 2700–10,000 K adjustable CCT, with local adjustment in 100 K increments.
- Positive and negative DUV (green–magenta) adjustment.
- 360° hue control, independent saturation and 72 preset colours.
- 16°–60° motorized zoom with last-position memory.
- Average CRI (Ra) ≥95 and average TLCI ≥95.
- 16-bit or higher linear dimming; seven dimming modes; PWM frequency ≥28 kHz.
- DMX512 and RDM; 6-channel, 14-channel and 15-channel personalities.
- Detachable barn doors with 360° rotation.
Full-Color LED Fresnel Spotlight Demonstration
Review the DUNDI Fresnel demonstration for colour, beam shaping and operation. Refer to this page’s DD-SC200 specifications when selecting your fixture.
DD-SC200 Full-Color LED Fresnel Spotlight Specifications
| Parameter | DD-SC200 Specification |
|---|---|
| Model | DD-SC200, standard fan-cooled version |
| LED Source | 24 × multicolor 5050 LED packages, each with a nominal package rating of up to 24 W. Actual fixture power is electronically limited by the multi-channel drive system. |
| Maximum Power Consumption | 220 W |
| White-Output Power Consumption | 220 W at 2700–10,000 K white output |
| Single-Colour Power Consumption | Red: 55 W; Green: 110 W; Blue: 110 W |
| Input Voltage | AC 100–240 V, 50/60 Hz |
| CCT | 2700–10,000 K adjustable; 100 K local increments |
| DUV / Green–Magenta | Approximately +0.018 to −0.020 |
| Colour Control | 360° hue, independent saturation, 72 preset colours and individual colour-channel adjustment |
| Colour Rendering | Average CRI (Ra) ≥95; average TLCI ≥95; average TM-30 Rf ≥92; Rg 100–103 |
| Zoom | 16°–60°, motorized; retains last-used position after power-off |
| Dimming | 16-bit or higher linear dimming; seven selectable modes; PWM frequency ≥28 kHz |
| Control | DMX512 with RDM; local buttons and rotary encoder |
| DMX Modes | 6-channel / 14-channel / 15-channel |
| Display | OLED, Chinese / English menus; 30 × 15 mm |
| Cooling | Intelligent variable-speed fan cooling; speed responds to temperature and output. Fan may stop under low-output conditions. |
| Noise | ≤29 dB at 1 m, as specified in the datasheet |
| LED Lifetime | 50,000–100,000 hours |
| Housing | Aluminum alloy; anodized or powder-coated finish |
| IP Rating | IP20, indoor use |
| Operating Ambient Temperature | −25 °C to +40 °C |
| Standard Accessories | Barn doors, power input/output connectors and signal input/output connectors |
Luminous Flux by Output Setting
| Output Setting | Luminous Flux |
|---|---|
| 2700 K | 7,100 lm |
| 3200 K | 7,400 lm |
| 5600 K | 7,500 lm |
| 10,000 K | 6,900 lm |
| Red | 480 lm |
| Green | 3,200 lm |
| Blue | 760 lm |
White-Light and Colour Control for Studio Work
A full-color LED Fresnel spotlight lets the operator work with white light and coloured light from the same fixture. Use the CCT mode to match the white-light setting of the scene, then refine the green–magenta balance with DUV adjustment. For coloured backgrounds or theatrical looks, choose hue and saturation, select a preset colour or adjust the available colour channels.
The 6-channel personality provides a compact control layout for dimming, CCT, DUV, zoom and strobe. The 14-channel and 15-channel personalities add expanded colour functions; the 15-channel mode includes a fine dimmer channel. The user manual explains which functions override other colour controls, so review its channel tables before building a console fixture profile.
Motorized zoom changes coverage between 16° and 60°. The optical assembly extends for a narrow beam and retracts for a wide beam. Use the rotating barn doors to help reduce spill, and consult the datasheet’s illuminance tables for your intended throw distance. For DMX and RDM background, see the ESTA published lighting-control standards.
DD-SC200 Dimensions & Zoom Positions
| Parameter | Standard Fan-Cooled Version |
|---|---|
| Fixture Size | 50 × 28.5 × 28.5 cm |
| Packing Size | 62 × 34 × 40 cm |
| Net Weight Including Barn Doors | 10.3 kg (fixture 9.3 kg + barn doors 1.0 kg) |
| Gross Weight | 12 kg |



Full-Color LED Fresnel Spotlight FAQ
Which model is the full-color version?
DD-SC200 is the standard full-color model on this page. DD-SW300 and DD-SW200 are tunable-white models; DD-S56A, DD-S56B, DD-S32A and DD-S32B are fixed-CCT models. A shared housing does not make their optical or control specifications interchangeable.
Is DD-SC200 fanless?
No. DD-SC200 uses variable-speed fan cooling. DD-SC200N is a separate fanless version covered by the shared documents. Specify the exact model when requesting a quotation.
Are the LEDs rated at the same power as the complete fixture?
No. The nominal LED package rating describes the individual package. The multi-channel drive system electronically limits fixture power. Use the complete-fixture power values in the specification table for electrical planning.
Where can I find the DMX channel map?
Open USER MANUAL for the 6-channel, 14-channel and 15-channel tables, CCT DMX values and colour-preset references. Open DATASHEET for photometric data and version-specific dimensions.
Request a DD-SC200 Quotation or Live Demo
Tell us your quantity, destination, application, required throw distance and control system. Our team can discuss the full-color LED Fresnel spotlight and demonstrate its CCT, DUV, colour and zoom controls. Explore DUNDI lighting technology for more product-development information.
Request a Quote Request a Live Demo
Request a DD-SC200 Quotation
Please specify model, quantity and destination.
|







