Speak directly with a DUNDI director about distribution, OEM, private-label, or long-term cooperation.
Fixed-CCT LED Broadcast & Studio Panel Light
DUNDI LED broadcast studio panel light: fixed 3200 K or 5600 K; 300 W, 200 W or fanless 150 W.
- 960 single-CCT LEDs; CRI ≥96; TLCI ≥96
- 105° FWHM beam; 420 × 260 mm emitting area
- 16-bit dimming; PWM ≥28 kHz
- 1-channel DMX512, RDM and local control
LED Broadcast Studio Panel Light: Fixed-CCT Soft Lighting
The DUNDI LED broadcast studio panel light delivers a broad 105° beam for presenter lighting, interview sets and conference production. Choose a dedicated 3200 K or 5600 K fixture in the 300 W, 200 W or 150 W series. Each model uses 960 single-CCT 2835 LEDs, with CRI ≥96 and TLCI ≥96. The 150 W versions are fanless; the 200 W and 300 W versions use variable-speed fans.
This is a fixed-CCT fixture: the selected model supplies one white-light colour temperature. It does not tune between warm and daylight white during operation. Select matching fixtures when a consistent white balance across several camera positions is required.
6 reasons to specify this studio panel
- Six order codes covering 3200 K and 5600 K in three power classes.
- 420 × 260 mm emitting area and 105° FWHM beam.
- CRI ≥96, TLCI ≥96 and TM-30 Rf ≥93.
- 16-bit or higher dimming, six dimming modes and PWM ≥28 kHz.
- One-channel DMX512, RDM and local rotary control.
- Removable barn doors and diffusion panel; customizable anti-glare grids.
LED Broadcast Studio Panel Light Model Comparison
All six versions share a 960 × single-CCT 2835 LED source, with a nominal 0.6 W rating per LED. The datasheet states an operating level of 0.2–0.35 W per LED. LED package ratings are separate from fixture power consumption.
| Model | Series class | Fixed CCT | Maximum power consumption* | Luminous flux | Cooling |
|---|---|---|---|---|---|
| DD-SP56A | 300 W | 5600 K | 310 W | 25,600 lm | Variable-speed fan; ≤35 dBA at 1 m |
| DD-SP32A | 300 W | 3200 K | 310 W | 23,100 lm | Variable-speed fan; ≤35 dBA at 1 m |
| DD-SP56B | 200 W | 5600 K | 220 W | 19,200 lm | Variable-speed fan; ≤25 dBA at 1 m |
| DD-SP32B | 200 W | 3200 K | 220 W | 17,400 lm | Variable-speed fan; ≤25 dBA at 1 m |
| DD-SP56C | 150 W | 5600 K | 160 W | 14,900 lm | Fanless passive cooling |
| DD-SP32C | 150 W | 3200 K | 160 W | 13,800 lm | Fanless passive cooling |
Power documentation: the datasheet identifies 300/200/150 W model classes and lists maximum consumption of 310/220/160 W. The user manual separately lists rated power as 320/230/160 W. The first two figures differ between documents; confirm the final nameplate and electrical requirements with DUNDI before ordering or circuit design.
Model code: DD = DUNDI; SP = studio panel; 56 = 5600 K; 32 = 3200 K; A/B/C = 300/200/150 W series respectively. Both C models use fanless cooling. They do not need an N suffix.
Colour, Beam and Output
| Parameter | Specification |
|---|---|
| Light source | 960 × single-CCT 2835 LEDs; 0.6 W nominal rating per LED |
| LED lifetime | 50,000–100,000 hours |
| Colour temperature | 3200 K or 5600 K, selected by order code; custom CCT on request |
| Colour rendering | CRI ≥96; TLCI ≥96; TM-30 Rf ≥93; Rg 104 |
| Beam angle | 105° FWHM, measured at 50% of centre intensity |
| Light-emitting area | 420 × 260 mm |
| Dimming | 16-bit or higher; six selectable dimming modes; PWM ≥28 kHz |
A broad beam helps cover a presenter area at short throw distances. Use the barn doors to manage spill, and discuss diffusion or grid requirements for the camera position and available mounting height. An LED broadcast studio panel light provides a different beam from a focused profile or Fresnel fixture; select each according to the lighting task.
Measured centre illuminance
The following values are taken directly from the datasheet. They describe centre illuminance rather than average illumination over a working area. Room reflections, mounting angle, accessories and exposure settings affect practical results.
| Series | CCT | 1 m (lx) | 3 m (lx) | 5 m (lx) | 10 m (lx) |
|---|---|---|---|---|---|
| 300 W | 3200 K | 11,310 | 1,257 | 452 | 113 |
| 300 W | 5600 K | 12,195 | 1,355 | 487 | 122 |
| 200 W | 3200 K | 8,358 | 928 | 335 | 83 |
| 200 W | 5600 K | 8,695 | 965 | 348 | 86 |
| 150 W | 3200 K | 6,163 | 731 | 262 | 65 |
| 150 W | 5600 K | 6,885 | 765 | 276 | 68 |
LED Broadcast Studio Panel Light Control and Cooling
Control brightness locally using the buttons and rotary encoder, or use one DMX channel for the master dimmer. RDM supports remote device management on a compatible system. The LCD has Chinese and English menus and measures 35 × 29 mm.
| Control item | Details |
|---|---|
| DMX protocol | DMX512 with RDM support |
| DMX mode | 1 channel: master dimmer |
| Local control | Buttons and rotary encoder |
| Master/slave | Set fixture addresses to 001, disconnect the external DMX signal and enable Master on one fixture; follow the user manual |
| 300 W cooling | Variable-speed fan; stops below 50% output; maximum ≤35 dBA at 1 m |
| 200 W cooling | Variable-speed fan; stops below 50% output; maximum ≤25 dBA at 1 m |
| 150 W cooling | Fanless passive cooling; no fan noise |
For sound-sensitive interviews, the 150 W fanless LED broadcast studio panel light avoids fan noise. For higher output, assess the 200 W or 300 W version against microphone placement and required illuminance. High PWM frequency supports camera work, but test the intended frame rate, shutter setting and dimming level with your production camera.
Dimensions, Construction and Installation
| Item | Specification |
|---|---|
| Input voltage | AC 100–240 V, 50/60 Hz |
| Fixture with barn doors | 560 × 146 × 360 mm |
| Fixture without barn doors | 560 × 115 × 345 mm |
| Packing dimensions | 620 × 235 × 420 mm |
| Net weight | 9.2 kg total: 7.5 kg fixture + 1.7 kg barn doors |
| Gross weight | 10.5 kg |
| Housing | Aluminum alloy; anodized or powder-coated finish |
| Operating temperature | −25 °C to +40 °C |
| Protection | IP20; indoor use |
Keep ventilation paths unobstructed and allow clearance for aiming, cable routing and barn-door movement. Use mounting equipment suited to the fixture weight and venue requirements. The manual’s power-link note gives “8/10 fixtures” without identifying which model or supply voltage it applies to. Confirm the allowable load for your exact configuration; do not treat that note as a universal linking limit.
Included accessories and beam control
The user manual lists one panel light, one set of barn doors, one pair of power input/output connectors and one pair of 3-pin DMX input/output connectors. The diffusion panel and barn doors are removable and replaceable. Anti-glare grids can be customized for beam control; confirm the supplied grid and any alternative diffusion before ordering.
Applications and Fixture Selection
Specify this LED broadcast studio panel light for indoor television studios, corporate video rooms, interview positions and conference presenter areas. Choose 3200 K for a tungsten-balanced setup or 5600 K for a daylight-balanced setup. Match the colour temperature to the rest of the lighting and set the camera white balance accordingly.
Share the stage width, mounting height, working distance and required camera settings with our team. These details help select the number of fixtures, output class and beam-control accessories. See our lighting projects for installation examples, or compare other professional lighting fixtures for complementary roles.
LED Broadcast Studio Panel Light FAQ
Can I adjust this panel from 3200 K to 5600 K?
No. Each order code has one fixed CCT. Choose a 3200 K or 5600 K model before purchase. Ask DUNDI about other product options if your application needs tunable white.
Which version is fanless?
DD-SP32C and DD-SP56C are the 150 W fanless versions. The 200 W and 300 W models use intelligent variable-speed fan cooling.
Does the panel support DMX and RDM?
Yes. This LED broadcast studio panel light uses one DMX channel for master dimming and supports RDM. Local dimming and master/slave operation are also documented.
Is it suitable for high-speed filming?
The specified PWM frequency is ≥28 kHz. Confirm the intended camera, frame rate, shutter and dimming settings in a practical test before committing to a shoot.
Where can I find the full specifications and instructions?
Open the DATASHEET and USER MANUAL tabs for the matched PDFs, including dimensional drawings and the DMX channel chart. You can also download the panel datasheet and download the user manual.
Discuss Your Studio Lighting Project
Request pricing for your preferred LED broadcast studio panel light model, quantity and destination. Include the selected fixed CCT, mounting distance and any diffusion or grid requirements. Our team can also arrange a live showroom demonstration.
Request Panel Light Pricing
|
