Speak directly with a DUNDI director about distribution, OEM, private-label, or long-term cooperation.
5° Fanless CCT Tunable LED Fixed-Angle Profile Spotlight
The DUNDI fanless CCT tunable LED fixed-angle profile spotlight in this fanless configuration offers 5° optics, 2700–6500 K adjustable white light for theatres, studios and indoor productions. This fanless version is available only with the 200 W LED engine, with 230 W maximum consumption.
- 5° fixed optics · manual focus
- 2700–6500 K · CRI ≥95 · TLCI ≥95
- 200 W LED engine · 230 W max. consumption
- DMX512 / RDM · 3 / 4 channels
- PWM ≥28 kHz · Passive fanless cooling
5° Fanless CCT Tunable LED Fixed-Angle Profile Spotlight
The DUNDI fanless CCT tunable LED fixed-angle profile spotlight in this fanless configuration offers 5° optics, 2700–6500 K adjustable white light for theatres, studios and indoor productions. This fanless version is available only with the 200 W LED engine, with 230 W maximum consumption.
The 5° lens concentrates the beam for long throws, distant stage positions and small targets. At 10 m, the published beam diameter is approximately 0.87 m. Check the target size and mounting distance before selecting this narrow optic.
Models Represented by This Page
DD-PT5N. This page represents 1 fanless cct tunable model. The lens angle is 5°. Other configurations in the series comparison below are separate order codes.
Fanless CCT tunable LED fixed-angle profile spotlight: 21-Model Series Comparison
Compare every tunable-white DD-PT order code across 5°, 10°, 14°, 19°, 26°, 36° and 50°. Fourteen fan-cooled models (300 W / 200 W) and seven fanless 200 W models make 21 models. All angles are fixed optics with manual focus, rather than a continuous zoom range.
| Model | Fixed angle | Adjustable CCT | LED version | Max. consumption | Cooling |
|---|---|---|---|---|---|
| DD-PT5A | 5° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT5B | 5° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT5N | 5° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT10A | 10° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT10B | 10° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT10N | 10° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT14A | 14° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT14B | 14° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT14N | 14° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT19A | 19° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT19B | 19° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT19N | 19° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT26A | 26° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT26B | 26° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT26N | 26° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT36A | 36° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT36B | 36° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT36N | 36° | 2700–6500 K | 200 W | 230 W | Fanless |
| DD-PT50A | 50° | 2700–6500 K | 300 W | 320 W | Fan-Cooled |
| DD-PT50B | 50° | 2700–6500 K | 200 W | 230 W | Fan-Cooled |
| DD-PT50N | 50° | 2700–6500 K | 200 W | 230 W | Fanless |
Model code: DD = DUNDI; PT = Profile Tunable; 5 / 10 / 14 / 19 / 26 / 36 / 50 = fixed beam angle; A = 300 W LED version; B = 200 W LED version; N = fanless 200 W version. Nominal LED package ratings are component specifications, not actual fixture consumption.
Fanless CCT tunable LED fixed-angle profile spotlight Specifications
Match the fanless CCT tunable LED fixed-angle profile spotlight to the required output, control mode and installation space. The values below follow the corresponding manufacturer datasheet; the table identifies the models actually represented by this product page.
| Parameter | Specification |
|---|---|
| Models on this page | DD-PT5N |
| Beam / focus | 5° fixed-angle optics; manual focus |
| Colour temperature | 2700–6500 K adjustable via DMX or local rotary control; display in 100 K increments |
| LED source | 88 bi-color LEDs: 44 warm-white + 44 cool-white; 5 W nominal per LED |
| Power input | AC 100–240 V, 50/60 Hz |
| Power consumption | 200 W LED version; maximum fixture consumption 230 W |
| Colour quality | Average CRI ≥95; TLCI ≥95; TM-30 Rf ≥92; Rg 96–98 |
| Luminous flux | 200 W: 6600 lm at 2700 K / 8300 lm at 6500 K |
| Control | DMX512 with RDM; local buttons and rotary encoder |
| DMX modes | 3 / 4 channels |
| Dimming | 16-bit or higher; PWM ≥28 kHz; 6 selectable dimming modes |
| Cooling | Passive fanless cooling; no fan noise |
| Optical system | Seven optical elements for a clean, uniform projected beam |
| Housing / display | Aluminum alloy; OLED 30 × 15 mm; Chinese / English menus |
| Environment | IP20; indoor use; −25 °C to +40 °C operating ambient |
| LED lifetime | 50,000–100,000 hours as stated in the datasheet |
| Standard accessories | Diffusion filter; one pair each of power input/output and 3-pin DMX input/output connectors |
| Optional accessories | Iris and gobo holder on request |
Tunable White for Stage and Studio
Use adjustable white light to match presenters, scenery and existing tungsten or daylight sources. Changing CCT through DMX avoids replacing the fixture when production requirements change. This bi-colour system is intended for white-light adjustment; choose the full-colour family when hue, saturation or individual colour mixing is required.
The fanless CCT tunable LED fixed-angle profile spotlight adjusts white light from 2700 K to 6500 K. The datasheet specifies CCT accuracy ≤3%, power variation ≤5% and average beam CCT deviation ≤6% excluding the extreme edge. CCT remains adjustable down to 0.03% output. These are manufacturer specifications; evaluate the selected settings with your camera and exposure.
DMX512 and RDM Setup
The fanless CCT tunable LED fixed-angle profile spotlight can be controlled at the fixture or from a DMX console. Select the channel mode before patching the console, then assign the start address. RDM supports fixture management over a compatible control system. Read the USER MANUAL tab for channel priorities, function-switch behaviour and preset value ranges.
| DMX mode | Channel functions |
|---|---|
| 3-channel | 1 master dimmer; 2 CCT; 3 strobe |
| 4-channel | 1 master dimmer; 2 16-bit dimmer fine; 3 CCT; 4 strobe |
The 4-channel mode adds fine dimming to the 3-channel layout. The manual maps 2700 K to DMX 0–5, 3200 K to 30–35, 5600 K to 174–179 and 6500 K to 228–255.
Fanless CCT tunable LED fixed-angle profile spotlight: Beam Coverage and Photometry
The following values are manufacturer-published centre illuminance at a 10 m throw. Beam diameter describes coverage, while lux describes the centre reading; they answer different selection questions. Compare the fanless CCT tunable LED fixed-angle profile spotlight at the intended colour setting and evaluate actual mounting geometry before ordering.
| Fixed angle | Beam diameter at 10 m | 200 W / 2700 K (lx) | 200 W / 6500 K (lx) |
|---|---|---|---|
| 5° | 0.87 m | 7469 | 9655 |
The datasheet states that the fanless and corresponding fan-cooled versions share optical performance. Use the DATASHEET tab for the full distance tables. Beam shaping, accessories, fixture orientation and the target surface can change usable illumination. A fixed lens does not change angle when you adjust manual focus.
Fanless CCT tunable LED fixed-angle profile spotlight: Dimensions and Weight
Allow room for the yoke, connectors, cable bends and focus access when mounting the fanless CCT tunable LED fixed-angle profile spotlight. Published dimensions and packing dimensions are in centimetres; net and gross weights are in kilograms.
| Fixed angle | Published size (cm) | Packing size (cm) | Net (kg) | Gross (kg) |
|---|---|---|---|---|
| 5° | 120 × 41 × 43 | 130 × 50 × 50 | 12.6 | 17 |
The table follows the angle-specific datasheet entries. Dimension drawings use separate millimetre callouts and should be checked for installation clearances. The manual’s overview lists some different net weights and the datasheet’s general fanless weight note differs from individual rows; confirm the selected model’s shipping weight before booking freight.
Installation and Operation
Passive cooling removes fan noise, making these models useful around dialogue, recording microphones and quiet presentation areas. Keep ventilation paths clear and allow adequate spacing for heat dissipation. The IP20 housing is intended for indoor environments. Use suitable mounting hardware, an independent safety restraint and a grounded supply. Confirm power-link limits for the actual voltage and ordered version.
Fanless CCT tunable LED fixed-angle profile spotlight: Selection Questions
Is this a zoom profile spotlight?
No. The fanless CCT tunable LED fixed-angle profile spotlight uses a fixed 5° beam angle. Manual focus sharpens the projection but does not provide continuous zoom. Choose a zoom model if one fixture must cover a continuously variable angle range.
Does the colour temperature change through DMX?
Yes. The bi-colour engine adjusts from 2700 K to 6500 K through DMX or the local rotary control. The display shows CCT in 100 K increments. This differs from a fixed-CCT product supplied with one permanent white-light setting.
Which power and cooling version should I specify?
Choose an N-suffix order code for the fanless 200 W LED version. There is no 300 W fanless model in this datasheet. Maximum fixture consumption is 230 W.
Are iris and gobo accessories included?
The standard package contains the fixture, diffusion filter and connector pairs. The iris and gobo holder are optional. Specify required accessories, gobo requirements and compatibility with your chosen lens when requesting a quotation.
Where can I find the datasheet and manual?
Use the DATASHEET and USER MANUAL tabs, or open the CCT Tunable fixed-angle datasheet PDF and matching user manual PDF directly. For DMX/RDM background, see the Entertainment Services and Technology Association.
Related Fixed-Angle Profile Options
- 14° 19° 26° 36° 50° CCT Tunable LED Fixed-Angle Profile Spotlight
- 5° CCT Tunable LED Fixed-Angle Profile Spotlight
- 14° 19° 26° 36° 50° Fanless CCT Tunable LED Fixed-Angle Profile Spotlight
- 10° Fanless CCT Tunable LED Fixed-Angle Profile Spotlight
- 10° CCT Tunable LED Fixed-Angle Profile Spotlight
Specify Your Fanless CCT tunable LED fixed-angle profile spotlight
Send the required model code, fixed angle, quantity, throw distance and target width. Include your control system, supply voltage, accessories, delivery destination and microphone or camera requirements. We can review the fanless CCT tunable LED fixed-angle profile spotlight configuration and arrange a product demonstration for your application.
Request a Quote Request a Live Demo
Request a Product Quotation
Tell us your model, beam angle, quantity, delivery destination and installation requirements.
Request a Live Product Demo
Tell us your application and preferred demonstration time.
